Sequential shifter : Forward position Tr6060,Magnum

$ USD 1,599.00 + Gst for Australian orders

Sequential shifter

Clear

Description

We finally came up with a neat way to mount a sequential shifter in the forward position on a T56/Magnum/Tr6060 and these are being made now. There are some limitations on which boxes this will fit though, it will have to be from a  6 bolt Magnum/  Ve,Vf Commodore, 5th/6th Gen Camaro, Gt500 mustang, 1st gen ctsv. Basically that’s any transmission that has the fitting to accept a shifter under the front 4 bolt cover.

This shifter will convert your standard H-pattern gearbox to sequential operation with a simple bolt fitting for repeatable quick shifts. This product has been designed for easy instaliation for anyone with basic mechanical skills but willl require you to remove the rear housing to change the coupling inside the gearbox, this is a very easy job with no special skills or tools required. Get the next gear every time! It’s not possible to get the wrong gear with this shifter. No more accidental 2-5 shifts costing races or 5-2 costing engines.

  • ~ Precise mechanical feed back to the driver.
  • ~ Fast consistent shifting.
  • ~ Mechanical reverse lock out for safety and ease of installation.
  • ~ Option of 0-5V position sensor for use with data logging and electronic dash equipment this can also be used for gear-based boost settings and other applications.
  • ~ Optional gear indicator ( requires position sensor to work).
  • ~ Proven performance.
  • ~ Neutral can be selected between every gear.
  • 2021 update smooth shift indexing cam
  • 2021 update left lever version available 
  • Dogbox/faceplate version available 

Performance benefits 

Get the next gear every time! It’s not possible to get the wrong gear with this shifter. No more accidental 2-5 shifts costing races or 5-2 costing engines.
Our sequential shifter does not work by forcing the gearbox into gear and will actually apply less force to the internals than a standard shifter and far less miss shifts will drastically reduce gearbox wear. The shifter has been specifically designed for use with synchro gearboxes and the loads encountered under hard driving, you will not break this shifter!
The shift speeds are improved purely through the greatly improved usability for the driver. The simple pull back to up shift and push forwards to down shift is much easier to coordinate all movements under racing loads than the H-pattern shift. We have also optimised the design for the best driver feedback possible we do not add any rubber joints to give the driver a smoother feeling as in the performance application we would call that a vague shift

What’s included in this kit?

 

The basic kit includes everything you need to convert your gearbox to sequential shift including the shift knob but we do have some options :

  • ~ If you like the simplicity of no electronics you might like to order the shifter with no accessories.
  • ~ If your car is fitted with an aftermarket dash display you will probably be able to display the gear on this with only the gear position sensor (0-5V output).
  • ~ If you want a gear display and have a standard dash display in your car the easiest way is without gear position sensor and gear indicator.
  • ~ The offset lever option can be used to move the lever in every direction.
  •   The shifter surround part is designed specifically for the right lever style, this may not fit the left lever style.

Which gearboxes will this version fit?

This is designed to fit the mid position of the tremec t56,tr6060 and Magnum  boxes, This position is generally used for trucks or cars like a cobra replica that have the engine and gearbox mounted a long way back in the chasssis.
Although we can make these for t56,tr6060 and Magnum  boxes it has to be a box that has a factory coupling inside that mid position cover or atleast used the factory selector shaft in front of these. Please do not cut and drill a longer shaft from other variants, the position of the hole in this is very important.

Gearboxes that will work as factory are :

Holden commodore VE/VE T56 and Tr6060

Tremec Magnum , 6 bolt shifter type.

5th/6th gen camaro gearbox.

Gt500 Mustang tr6060

CTS-v 1st gen

**Technical drawings are of a GMt56 shifter, the mid mounted shifter unit its self is the same but the base plate will be different**

(Dimensioned drawings are available for you to check compatibility, all shifters fit gearboxes and not specific cars, you may need to modify the transmission tunnel to suit.)

What is included?

The basic kit includes everything you need to convert your gearbox to sequential shift including the shift knob but we do have some options :

    • ~ If you like the simplicity of no electronics you might like to order the shifter with no accessories.
    • ~ If your car is fitted with an aftermarket dash display you will probably be able to display the gear on this with only the gear position sensor (0-5V output).
    • ~ If you want a gear display and have a standard dash display in your car the easiest way is without gear position sensor and gear indicator.

Please see the street test at this link : Sequential shifter street test
On track at this link : sequential shifter videos 

All direct mount shifters are design to fit the gearbox and not a specific car, with direct mount shifters most require some trimming of the transmission tunnel and we have the “shifter surround” part available to seal this back up. In most cars the shifter will clear the interior trims and look neat once installed, if you can’t find a picture of a shifter installed in your model of car send us a message.

This design is Patent Pending

This error message is only visible to WordPress admins
Error: No posts found.

Additional information

Weight 4.2 kg
Dimensions 30 × 30 × 10 cm
Right or Left lever

Right, Left

Reviews

There are no reviews yet.

Be the first to review “Sequential shifter : Forward position Tr6060,Magnum”

You may also like…