Description
Sequential shift to suit the classic ford top-loader box, please note this will not fit all toploaders only the rear housing listed below.
The shift pattern is 1234 with a neutral between in each gear, in this way you can easily drop it out of 4th to neutral to roll it out after a run and its impossible to accidentally get neutral if you attempt to down shift from first.
To keep things simple and reliable reverse is selected with a second independent lever.
There is 2 lever options available, straight or laid back and the throw is 70mm / 2.75 inches
All fitting components are included with each shifter including the shift arms, push rods and shift knob, We have an optional gear indicator and sensor available.
Fitment instructions can be found here https://s1sequential.com/wp-content/uploads/2025/08/4-speed-toploader-101-muncie-instructions.pdf
Ford toploader fitment: Our shifter is designed for the C7OR-7A040-A tail housing, Please check yours is the same as pictured before ordering but i believe this is found in the following cars. This page has some good info on toploader housings https://www.davidkeetoploaders.com/tailhousingid.htm
1967 up Fairlane, Cyclone 427, 428
1968-69 Mustang 428, 429
14″ length, 31 spline1966-68 Fairlane, Cyclone, Ranchero, Torino 289, 302, 390
1966-69 Falcon 289, 302
1966-69 Mustang, Cougar 390
14″ length, 28 spline
